Logo anticorrosion Tef-Gel

TEF-GEL · Anticorrosive Lubricant

  • AUTHENTIC FORMULA ®

    TEF-GEL is a watertight, PTFE-based paste which prevents the blooming of metal and also reliably prevents corrosion from galvanic flows between unequal metals
  • WATERTIGHT

    Durable, saltwater-proof and UV resistant lubricant
  • ECOLOGICAL AND RESISTANT

    Tef-Gel, which contains 0% volatile solvents, will no evaporate, cold flow, or dry out, giving protection many years later when hardware must be dissembled.

APPLICATIONS

MARINE

BIKE

AUTO

AVIATION

TEF-GEL

ANTICORROSIVE LUBRICANT

TEF-GEL is a watertight, PTFE-based paste which prevents the blooming of metal and also reliably prevents corrosion from galvanic flows between unequal metals. In all places where refined metals come into contact with less refined metals (e.g. aluminium with special steel), a small amount of TEF-GEL suffices to prevent galvanic exchange of electrons and subsequent corrosion.
Assemble your bolted connections with TEF-GEL and every connection is easy to disconnect even after intensive use in sea water. The same also applies to corrosive locking of set screws, shroud clamps or other bolted connections.
Tef-Gel applied to both mating surfaces of nuts and bolts or threaded holes and bolts leaves a layer of 40% solid PTFE within the thread interface, which works as friction barrier.
Tef-Gel, which contains 0% volatile solvents, will no evaporate, cold flow, or dry out, giving protection many years later when hardware must be dissembled. It protects connections of various metals, and screw connections are kept workable permanently.

Use

TEF-GEL is applied to the surface to be protected, smoothly and evenly, directly from the tube or using a small brush. TEF-GEL never dries up, which means there is no processing time. Use turpentine to clean tools or surroundings.

  • Cleaning : mineral spirit
  • Storage: open container >10 years
  • Consistency: pasty
  • Combustion point: > 230 °C
  • Processing temp.: -20 °C bis +45 °C
  • Density: approx. 1.077 g/L

High Lights

TEF-GEL is as a saltwater-proof lubricant and as a sealant that reduces the penetration of water through bolt holes or rivet joints.

  • Stops corrosion of stainless screws in aluminum and any other dissimilar metal corrosion
  • Stops seizing, assemble with Tef-Gel and disassemble with ease
  • Stops galling of stainless bolts and nuts
  • Tef-Gel does not electrically insulate hardware or electrical connections
TOP