Accessory
Showing 1–20 of 25 results
-
Zinc Anode
Help protect your Max-Prop with a Zinc Anode.
Make sure that you always keep the Anodes in good condition. They must be replaced at least once a year.
The Max-Prop Anode has a metal ring molded into it. This metal ring goes around the entire diameter where the screws attach the Anode to the propeller. This ring disburses the electrical current through the entire Anode giving it a much longer life.
Zinc Anode with mounting screws included
-
Tapered pivot pin locking screw
13.60 €M8x25 tapered pivot pin locking screw pre-applied with Loctite.
Fits all Flexofold Classic and LA propellers.Mounting :
Tool needed for mounting: 5mm allen key.
The tapered pivot pin locking screw is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
Shaft nut locking screw with tab washer
13.60 €M8x20 shaft nut locking screw pre-applied with Loctitewith + tab washer
Fits all Flexofold propellers for saildrive except on Torqeedo pod (see related products below).Mounting:
Tool needed for mounting: Socket wrench + screw driver.
The Loctite is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
FLOOR ANCHORS : Floor Boards &
From 14.14 €- Made of 316L Stainless Steel and Brass, Floor Anchors will not corrode, discolor with age, or damage the wood surface.
- Floor anchors safely hold 500 lbs. per unit – 1000 lb. breaking load.
- Meets ISAF requirements for offshore boats.
- Opening mechanism is a simple bayonet style, with ¼ turn lock and release that will not loosen with age.
- Can be opened or closed by either a coin or a flat head screwdriver.
- All components permanently attached – no loose pieces to drop in the bilge.
-
Shaft nut locking screw
5.93 €M8x16 locking screw to prevent the propeller shaft nut from getting lose.
Fits all Flexofold propellers for shaft installation.Mounting :
Tool needed for mounting: 4mm allen key.Please see mounting instruction for your specific Flexofold propeller.
-
Anchor Bolt
14.83 €M10x60 anchor bolts pre-applied with Loctite.
Fits all 2-blade Flexofold Composite propellers.Mounting :
Tool needed for mounting: 6 mm allen key.
The pre-applied Loctite is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
Zinc Anode Flexofold
From 33.37 €Zinc anode for use on all Flexofold propeller
Includes mounting screw pre-applied with Loctite.
The Loctite is usable for mounting above as well as underwater.For further information, please download mounting instruction for your specific Flexofold propeller.
- 1
- 2