Spreader Kits

Kit de Barre de Flèche

A partir de 487.00 

Ce kit de trois pièces comprend une section centrale et deux barres de flèche. Quatre boulons sont utilisés pour fixer chaque barre de flèche à la section centrale. Les barres de flèche sont profilés et orientés vers l’arrière de sorte que, quelle que soit l’installation, il n’y aura aucune interference avec votre electronique. Les barres de flèche et le support permettent d’intégrer le cablage. Cela contribue à la sécurité et à une belle finition d’installation. Toutes les pièces qui composent le kit de barre de flèche sont assemblées à l’aide de joints garantissant l’étanchétité de l’installation.

Effacer

Description

Spreader Kit Configurations

With this spreader kit there are two ways to configure it, one for a closed dome radar configuration and one for a satdome configuration. The above image illustrates what is included out of the box, including the extension posts. When you are using a closed dome radar with a spreader kit you want to raise your GPS units above the closed dome radar to avoid interference. If you are using a satdome you don’t need to use these extension posts with GPS units. You see satdome radio waves travel up to the sky to the satellites, while the GPS waves will travel horizontally. Therefore you do not want these raised above your satellite dome.

How to Get the Right Spreader Kit For You

There are two different spreader kits available from Seaview. The only difference between the two is the size of the midsection that mounts to whichever Seaview mount you have. The smaller of the two is the SP1-MOD. The SP1-MOD will only fit on Seaview mounts that have a part number ending in « M1 », for instance a PMA-57-M1. Mounts that end in « M2 » for example a PMA-DM2-M2 would use a SP2-MOD spreader kit.

Spreader Fitting Guide

Use the chart below to find the part number for a specific Seaview Spreader Kit.

Part # Fits Seaview Modular Mounts
SP1-MOD Fits Seaview Modular Mounts ending in « M1 ». For example PMA-57-M1
SP2-MOD Fits Seaview Modular Mounts ending in « M2 ». For example PMA-DM1-M2

Spreader Floodlight Kit

Seaview offers a LED flood light kit to enhance your visibility. This kit simply mounts underneath each spreader. Includes stainless steel bracket, mounting hardware and Hella 0670 Sea Hawk LED flood light (9-33v).Please note that this kit is only for 1 LED flood light. 

Avis

Il n’y pas encore d’avis.

Seulement les clients connectés ayant acheté ce produit peuvent laisser un avis.

HAUT mi, at id suscipit adipiscing dolor. porta.