Français 
English 
SEAVIEW : Radar, Satcom, POD & Cable Seal Mounting Solutions
Showing 1–20 of 33 results
-
Select options
Modular Radar Mounts
This Seaview Modular Radar Mount works with 18″ – 24″ closed dome radars. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Fitting Guide >
A Seaview Modular Top Plate is required and sold separately :
STEP 2 Find Your Modular Top Plate -
Select options
Modular Satdome Mounts
From 243.81 €This Seaview Modular Mount works with most satellite domes. The modular design allows you to add various accessories and different top plates at any point. Thus making it a cost effective choice. Specifically designed to not take up a large amount of space results in the perfect solution where space saving is a must. Oval hollow mast section allows for easy cable management.
A Seaview Modular Top Plate is required and sold separately :
STEP 2 Find Your Modular Top Plate -
Select options
Modular Dual Mounts
From 1,420.91 €Install your satdome above your radar using a Seaview Dual Mount. Doing this ensures maximum performance out of your electronics and eliminates radar interference. The bottom mounting plate is pre-drilled to fit all closed dome radars. Oval hollow mast section allows for easy cable management.
A Seaview Modular Top Plate is required and sold separately :
STEP 2 Find Your Modular Top Plate -
Select options
Stainless Steel Mounts
From 591.19 €Seaview Stainless Steel Radar Mounts are 5″ tall and aft leaning. The 7″ x 7″ base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel. This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length. Please note that if you intend to mount a open array radar a light bar will not be compatible. A Seaview Modular Top Plate is required and sold separately : STEP 2 Find Your Modular Top Plate
-
Select options
Modular Top Plate
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the “swiss cheese” look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Pick optional accessories, such as light bars, light bar tops, wedges, hinges and spreader kits :
STEP 3 Find Your Modular Mount Accessories -
Select options
Light Bars
Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts. These light bars are 1.25″ in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories such as LED anchor lights, GPS adapters, wind transducer adapters and etc. What’s also unique with Seaview light bars is that they can fold over 90° to allow for extra height clearance. The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
-
Select options
Base Wedges
From 81.08 €The most common planing attitude requires 3° – 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application.
- Pre-drilled mounting holes allow for quick and easy installation
- Made from marine-grade polymer
-
Select options
Hinge Adapter
From 630.71 €The Seaview Hinge adapter is the ideal solution for someone who needs extra height clearance when storing their boat. This allows the user to have their Seaview mount hinge backwards. Available for Seaview mounts with a base dimension of 7″x7″, 8″x8″ and 10-“x10”.
The modular design allows the user to not have to replace the entire mount when a different radar or satdome is used. Instead the user can just replace the top plate.
-
Select options
Spreader Kits
From 561.32 €This three piece kit consists of a mid section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that for what ever you decide to put on there it will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion.
-
Add to cartMORE INFO
SP7-SS
79.46 €Stainless steel 1-14 threaded insert for Seaview Spreader Kits. This insert replaces the plastic threaded insert that comes with Seaview Spreader Kits. By using this stainless steel threaded insert you can use 4′ or taller fiberglass antennas on all Seaview Spreader Kits.
-
Select options
Mast Mount Guard
From 553.26 €Protect your radome from damage and reduce wear and tear on the sails with Seaview Mast Mount Guards. Manufactured from marine grade 316 stainless steel and finished with a high polish. No extra fastenings required, mounted using the radome bolts. Fits easily between the mast mount and radar antenna.
-
Add to cartMORE INFO
Simrad Halo Hard Top Adapter Mount Plate
199.63 €This Simrad Halo Hard Top Adapter Mount Plate is a great solution when replacing an existing Simrad Broadband 3G, Broadband 4G, Raymarine or Garmin closed dome radar. Mounting holes pick up existing radar brands mentioned previously and the new Simrad Halo open array.
-
Select options
Low Profile Adapters
From 121.57 €Seaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation.
NOTE! The AMA-24 is intended for non-planning hulls only. These are not to be used in applications (i.e. buggy tops & tuna towers) where the antenna will experience extreme G Forces. If you have a planing hull contact Seaview for an aluminum reinforced mount.
-
Add to cartMORE INFO
Wedge For Low Profile Adapters
73.68 €The Seaview Low Profile Adapter Wedge will help you achieve the angle that you need to optimize your Low Profile Adapter installation. By rotating the AMA-W wedge halfves you can achieve 0°-12° of adjustment.
The AMA-W wedge works with AMA-16, AMA-18, AMA-24 and AMA-GXF wedges only!
- 1
- 2