Français 
English 
Boat Hardware
Showing all 15 results
-
Select options
Worm Gear Hose Clamp
From 2.21 €Entirely 316L stainless steel with a non-perforated? rolled edge, embossed band with a one-piece double locked screw cage.
- Sizes available 13mm – 380mm (1/3″ – 15″)
- Embossed band and cage
- Smooth inside band
- Corrosion resistant 316L Stainless
- One-piece double locked screw cage
- Durable & stable clamping force
-
Add to cartMORE INFO
Tapered pivot pin locking screw
13.60 €M8x25 tapered pivot pin locking screw pre-applied with Loctite.
Fits all Flexofold Classic and LA propellers.Mounting :
Tool needed for mounting: 5mm allen key.
The tapered pivot pin locking screw is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
Add to cartMORE INFO
Shaft nut locking screw with tab washer
13.60 €M8x20 shaft nut locking screw pre-applied with Loctitewith + tab washer
Fits all Flexofold propellers for saildrive except on Torqeedo pod (see related products below).Mounting:
Tool needed for mounting: Socket wrench + screw driver.
The Loctite is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
Read more
FLOOR ANCHORS : Floor Boards &
From 14.14 €- Made of 316L Stainless Steel and Brass, Floor Anchors will not corrode, discolor with age, or damage the wood surface.
- Floor anchors safely hold 500 lbs. per unit – 1000 lb. breaking load.
- Meets ISAF requirements for offshore boats.
- Opening mechanism is a simple bayonet style, with ¼ turn lock and release that will not loosen with age.
- Can be opened or closed by either a coin or a flat head screwdriver.
- All components permanently attached – no loose pieces to drop in the bilge.
-
Add to cartMORE INFO
Shaft nut locking screw
5.93 €M8x16 locking screw to prevent the propeller shaft nut from getting lose.
Fits all Flexofold propellers for shaft installation.Mounting :
Tool needed for mounting: 4mm allen key.Please see mounting instruction for your specific Flexofold propeller.
-
Add to cartMORE INFO
Anchor Bolt
14.83 €M10x60 anchor bolts pre-applied with Loctite.
Fits all 2-blade Flexofold Composite propellers.Mounting :
Tool needed for mounting: 6 mm allen key.
The pre-applied Loctite is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
Select options
Zinc Anode Flexofold
From 33.37 €Zinc anode for use on all Flexofold propeller
Includes mounting screw pre-applied with Loctite.
The Loctite is usable for mounting above as well as underwater.For further information, please download mounting instruction for your specific Flexofold propeller.
