Français 
English 
Sailing
Showing 1–20 of 49 results
-
Add to cartMORE INFOPhotoluminescent Paint
586.80 € Incl. VATLuminoKrom® photoluminescent paint harnesses renewable energy from solar radiation. It captures light during the day and lights up at night without any consumption of electricity or CO2 emissions.
- 10 h of Night Visibility
- High Resistance
- Security
- Patented Technological Innovation
- Eco-Sustainable
600g POT
-
Add to cartMORE INFORollable Boat Hook
119.00 € Incl. VATRevolve™ has designed and developed a unique, full size rollable boat hook that stows into a space not much bigger than a coffee cup. Using next generation rollable composite technology, it can be rolled up for storage and quickly unrolled for use. Minimising the space it takes up means that it can also be easily carried on craft not suitable for conventional boathooks including tenders, dinghys, even jet skis. Lightweight, strong and compact, the Revolve boat hook is truly revolutionary!
- Full size boat hook (1.9m/75in)
- Light and compact
- Stows in the smallest spaces
- Floats for easy recovery
- Tough weatherproof finish
-
Select optionsKiwiGrip Non-skid Deck Paint
From 66.00 €KiwiGrip is a very resistant and high performance anti-skid paint. It applies quickly and easily, thanks to its suitable roller included. By varying the application technique, the texture of the non-slip can pass from light, for a pleasure boat, to more aggressive, for a ship or an industrial application. Due to its homogeneous composition, KiwiGrip does not suffer from the problems encountered by other products with several components that you have to load sand, beads, rubber shavings… Traditional anti-skid coatings or paints tend to lose their loads by leaving a dangerous bridge. These paintings often become difficult to clean, retouch and even harder to redo.
- Monocomponent paint, without additive. The texture is obtained by varying the application technique.
- Only one layer is enough to cover most surfaces
- Highly resistant acrylic polymer offering a durable, homogeneous, and flexible surface.
- Water painting. Non-toxic, without volatile solvent, very low content in V.O.C. soap and water cleaning.
- Roller included
Note that the RAL codes are approximate
-
Select optionsMAGICEZY 9 Second Chip Fix : repair small holes, chips and gouges
ONE-PART FIBERGLASS BOAT REPAIRS
MagicEzy 9 Second Chip Fix is a ready-to-use, colored filler perfect for repairing small holes, chips and gouges on fiberglass, gelcoat, ceramics and stone.
It incorporates the latest nano technology to provide ultimate strength and adhesion.With a 3 year durability guarantee, you can be assured of a quality, long-lasting repair.
Suitable for many applications including on your boat, jet ski, RV, caravan, shower, bath tub, vanity unit, floor tiles, stone benchtop and many others.
-
Select optionsMAGICEZY Hairline Fix : Repair fine stress cracks and hairline fractures.
25.00 €ONE-PART FIBERGLASS BOAT REPAIR
MagicEzy Hairline Fix is a colored sealant used to quickly and easily repair fine stress cracks (spider cracks) and hairline fractures.
Complete the repair in seconds without having to grind out the existing damage. Use on gelcoat, fiberglass, ceramics and stone. Provides a long-lasting repair guaranteed to seal and protect for years. The strong adhesion in Hairline Fix helps prevent cracks from spreading.
Hairline Fix can also be used over the top of MagicEzy 9 Second Chip Fix to achieve a glossy finish.
-
Select optionsZinc Anode
Help protect your Max-Prop with a Zinc Anode.
Make sure that you always keep the Anodes in good condition. They must be replaced at least once a year.
The Max-Prop Anode has a metal ring molded into it. This metal ring goes around the entire diameter where the screws attach the Anode to the propeller. This ring disburses the electrical current through the entire Anode giving it a much longer life.
Zinc Anode with mounting screws included
-
Add to cartMORE INFOTapered pivot pin locking screw
14.41 € Incl. VATM8x25 tapered pivot pin locking screw pre-applied with Loctite.
Fits all Flexofold Classic and LA propellers.Mounting :
Tool needed for mounting: 5mm allen key.
The tapered pivot pin locking screw is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
Add to cartMORE INFOShaft nut locking screw with tab washer
14.41 € Incl. VATM8x20 shaft nut locking screw pre-applied with Loctitewith + tab washer
Fits all Flexofold propellers for saildrive except on Torqeedo pod (see related products below).Mounting:
Tool needed for mounting: Socket wrench + screw driver.
The Loctite is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
Read moreFLOOR ANCHORS : Floor Boards &
From 14.14 €- Made of 316L Stainless Steel and Brass, Floor Anchors will not corrode, discolor with age, or damage the wood surface.
- Floor anchors safely hold 500 lbs. per unit – 1000 lb. breaking load.
- Meets ISAF requirements for offshore boats.
- Opening mechanism is a simple bayonet style, with ¼ turn lock and release that will not loosen with age.
- Can be opened or closed by either a coin or a flat head screwdriver.
- All components permanently attached – no loose pieces to drop in the bilge.
-
Add to cartMORE INFOShaft nut locking screw
6.28 € Incl. VATM8x16 locking screw to prevent the propeller shaft nut from getting lose.
Fits all Flexofold propellers for shaft installation.Mounting :
Tool needed for mounting: 4mm allen key.Please see mounting instruction for your specific Flexofold propeller.
-
Add to cartMORE INFOAnchor Bolt
15.72 € Incl. VATM10x60 anchor bolts pre-applied with Loctite.
Fits all 2-blade Flexofold Composite propellers.Mounting :
Tool needed for mounting: 6 mm allen key.
The pre-applied Loctite is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
Select optionsSLC | Line Cutter – Zinc Anode
From 71.56 €SLC is a brand new, patent- pending concept, a line cutter with a zinc anode that protects your propeller from entanglement even as it offers corrosion protection to your marine vessel. It has been scientifically designed and engineered, and has been manufactured according to the highest industry specifications. It brings you all the benefits associated with a zinc anode.
-
Select optionsSRC : Shaft Retention Collar
From 23.78 €- Designed to protect Propeller and Rudder shafts
- Assists in keeping the shaft and rudder in the boat in the event of a coupling failure
- Easy installation with the shaft or rudder in place
- Available in sizes to fit shafts from 25 à 95mm (3/4 à 3-3/4″)
- Simple design
-
Select optionsTEF GEL Syringe
From 25.84 €TEF-GEL® is a watertight, PTFE-based paste which can be used universally.
- Prevents metal from blooming and protects reliably against corrosion by means of galvanic currents between different types of metal.
- Seawater-resistant lubricant and for sealing purposes to prevent water from penetrating.
- Used in the boat,bike & automotive industry, in aviation and aerospace and wherever parts have to be protected from corrosion.
- Contains 0% volatile solvents, TEF-GEL® will no evaporate, cold flow, or dry out, giving protection many years later when hardware must be dissembled.
