Français 
English 
Fixation
Showing all 15 results
-
Read more
FLOOR ANCHORS : Floor Boards &
From 14.14 €- Made of 316L Stainless Steel and Brass, Floor Anchors will not corrode, discolor with age, or damage the wood surface.
- Floor anchors safely hold 500 lbs. per unit – 1000 lb. breaking load.
- Meets ISAF requirements for offshore boats.
- Opening mechanism is a simple bayonet style, with ¼ turn lock and release that will not loosen with age.
- Can be opened or closed by either a coin or a flat head screwdriver.
- All components permanently attached – no loose pieces to drop in the bilge.
-
Add to cartMORE INFO
Anchor Bolt
15.72 € Incl. VATM10x60 anchor bolts pre-applied with Loctite.
Fits all 2-blade Flexofold Composite propellers.Mounting :
Tool needed for mounting: 6 mm allen key.
The pre-applied Loctite is usable for mounting above as well as under water.For further information, please download mounting instruction for your specific Flexofold propeller.
-
Select options
Deck Pods
From 375.29 €The DPOD has an anodized aluminum base that can rotate up to 350 degrees. The white UV resistant ABS plastic housing is sealed with a rubber water tight gasket, and held together with tamper resistant security screws. A GORE-TEX ventilation vent allows hot air to escape without letting moisture in.The DPOD has an anodized aluminum base that can rotate up to 350 degrees. The white UV resistant ABS plastic housing is sealed with a rubber water tight gasket, and held together with tamper resistant security screws. A GORE-TEX ventilation vent allows hot air to escape without letting moisture in.
-
Select options
Rail Pods
From 245.98 €Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat.
The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1″, 1-1/8″ or 1-1/4″ rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models). -
Select options
Sail Pods
From 0.00 €The Seaview Sail Pod, also known as SPOD is a instrument pod for sailboats and catamarans. Expanding on Seaviews modular mount concept, Seaview has developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Made from UV resistant white ABS plastic and sealed with a rubber gasket. Seaview has designed the SPOD so that the back of each box has a continuous radius that matches up with the stainless steel pod clamps. The result is precise viewing angle during installation for the customer. The pod fits the majority of steering pedestals from Jefa, Whitlock and Edson, and can be custom tailored for other systems.
-
Select options
Accessory Pods
From 161.05 €This Seaview Accessory Pod can be mounted to Seaview Sail Pods, Deck Pods or Rail Pods. These Accessory Pods give you the flexibility to mount additional instruments.
Made from high quality marine grade UV resistant ABS plastic and is held together with tamper resistant security screws. A water tight gasket prevents water from intruding into the pod.
Depending on the size of your Sail Pod, Deck Pod or Rail Pod one to four Accessory Pods can be mounted.Includes :
- Instrument housing
- Rubber gasket
- Security screws
- All mounting hardware
-
Select options
Aft Leaning Mounts
From 475.15 €Seaview 5″ and 12″ tall aft leaning mounts for thermal cameras and search lights. Powder coated brilliant white gives it a nice clean look and yet is very durable. Specifically designed for installations where space is very limited. The base for this mount is 7″ x 7″.
-
Select options
Vertical Mounts
From 448.92 €Get the most out of your thermal camera or search light with a Seaview vertical mount. This mount will raise your camera 5.5″ clearing anything that will obstruct your cameras view. The 8″ diameter base takes up very little space making it a great solution for installations where space is limited. Four pre-drilled holes allows for simple and easy installation.
-
Select options
RETROFIT Cable Seals
From 25.96 €The Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables! In a new category of its own, the new Retrofit Cable Seal provides a watertight installation for your currently installed cables. No need to re-run your cables, simply install with your cable in place! These new Seaview Retrofit Cable Seals provide a waterproof pass-through for antenna, transducer, lights, power and other cables without removal of the factory installed cable connector.
-
Select options
Cable Seals
From 23.30 €The Seaview Cable Seals/ Cable Clams provide waterproof cable routing made of UV stable Glass Filled (GF) ABS plastic, 316 stainless steel or black anodized aluminum. Seaview cable seal options for 17mm to 31mm (0.67” to 1.25”) connectors, making it ideal for almost every installation.
